Application; Default Settings - HBM WTX120 Bedienungsanleitung

7

Application

To access the Application group select the following keys:
Menu
Standard
WTX120 V#.#
Password
1 Service mode
2 Application
7.1

Default settings

In this menu group you can select the WTX120 application you need. These
are Standard or Filler.
Menu
1 General Setup
Application
WTX120
Key Function
Switch from Standard to version notice
Display the current firmware version number
Call up password entry within three seconds
Enter the password
324
Switch to the Application group
Call up the Application group
Key Function/secondary selection
Select the desired application
Standard
Filler
Note: The factory settings default is Standard
A04500_02_Y00_00 HBM: public
Application
77