Configuration Of The Digital Inputs And Outputs For Application: Standard - HBM WTX120 Bedienungsanleitung

Application
7.3.1 Configuration of the digital inputs and outputs
for Application: Standard
The following functional settings are available for configuration of the digital
inputs/outputs:
Menu
Digital IO
Input 1...8
Output 1...8
84
Key Function/secondary selection
Off
Tare
Rec. weight In the event of a standstill, it
Zero
Off
Manual
GW1
GW2
GW3
GW4
A04500_02_Y00_00 HBM: public
Deactivated
If the input is set ("1"), the
application is tared
conducts a measurement and
saves the current weight in the
alibi memory
Set the gross weight of the
scales to zero
Deactivated
Manual set/reset via
ServiceMode/Reset
(see chapter 6.6)
Limit switch 1
Limit switch 2
Limit switch 3
Limit switch 4
WTX120