Display Of Saved Weight Values - HBM WTX120 Bedienungsanleitung

The sequence of processing is: Operator control steps/data input, entry in
approved weight memory, print, data transfer.
The memory contains the data sets, each with the date of weighing, sequential
ID number, and gross and net weight. The sequential ID number is reset to 1
when the date changes. To be able to identify a weighing operation, this ID
number must either be printed on the weighing log or recorded on the com­
puter and saved along with the weighing data.
When data is transferred to a computer and processed on it, the approved
weights memory can be used as an alternative to the printer. The entries can
only be viewed. The stored values cannot be changed or deleted.
9.3.1

Display of saved weight values

Menu
Weight Storage
Search Date
ID no.
ID no.
WTX120
Key
99.99.99
99999
9999
A04500_02_Y00_00 HBM: public
Function/secondary selection
Locate and display the weight parameter
Enter the date of the weight entry you are
looking for
Apply preset/changed date
Enter the ID number of the weight entry you
are looking for
Apply preset/changed ID number
If no matching entry is found, the display
indicates: Weight not found
If a matching entry is found, the number of
entries stored under that date (9999) is
displayed.
Enter the ID no. of the weight entry you are
looking for
Supervisor mode
117