Supervisor Mode; General; Products - HBM WTX120 Bedienungsanleitung

Supervisor mode

9 Supervisor mode
To access the Supervisor Mode group select the following keys:
Menu
Standard
WTX120 V#.#
Supervisor mode
Supervisor Mode is used to enter parameters during normal operation. The
approved weight memory and the error report can also be viewed in
Supervisor Mode.
9.1

General

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
After entering the password, you can view and as necessary change the date,
time and password during operation in this menu group.
9.2

Products

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
The following menus are available in the Products group. They are described
in chapters 9.2.3 to 9.2.39:
Product no., Name, Dos.mode , Tare mode, Emptying,
Optimization, Re-Dosing, Alarm:Empty, Alarm:Flow monitor,
Alarm:Overflow, Alarm:Dos.Time, Alarm:Container,
Alarm:Min.start, Valve, Empty Ctrl, Target wght, Empty weight,
92
Key Function
Switch from Standard to version notice
Display the current firmware version number
Call Supervisor Mode within 3 seconds
Switch within the subgroups of
Supervisor Mode
A04500_02_Y00_00 HBM: public
WTX120