Resetting The Approved Weight - HBM WTX120 Bedienungsanleitung

Service mode
Service Mode group
Network
Information
The analog output (Config Analog out.) and fieldbus (Configuration Fieldbus)
must always be reconfigured after being reset. This is set in
Service Mode/Interface/Config Scale/Config.Analog out or Config. Fieldbus.
6.6.2

Resetting the approved weight

Menu
Service: Reset
Reset Approved Wgt
Type
72
Value
IP 192,168,100,088
Netmask
255.255.255.000
Gateway 0.0.0.0
Ext. Access Y
DNS
NTP
FTP password 2234
Key
N
Date+Id
A04500_02_Y00_00 HBM: public
Function/secondary selection
Y Delete content of approved weight
memory
No action
N
Create new weight memory:
Date+Id With date and 4-digit ID no.
Cons.Id With 6-digit consecutive no.
Value
PanelX access On
SetPanelX Passwd N
Access no. 5
Update SSL cert no.
Start auto ping N
Terminal no.
WTX120