Reset Parameters - HBM WTX120 Bedienungsanleitung

Calibration

10.10 Reset parameters

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
With this menu group you can reset the parameters of the A/D converter to
default values. The associated scale must then be recalibrated.
Menu
Select group 1-9
Reset Parameters?
The following table lists default values from the Calibration group to which
the Reset Parameter resets.
Group
1 Scale parameters
2 Calibration
142
Key Function/secondary selection
Press 7x for group 7 Reset Parameter
N Y
N
Parameters
Single/dual/triple range
One/two/three intervals
Capacity
Interval
Unit
Geo value
Zero (mV/V) W1
Load (mV/V) W1
Zero (mV/V) W2
Load (mV/V) W2
A04500_02_Y00_00 HBM: public
Reset parameters
Do not reset parameters
Standard
value
Single
range
One
interval
3000
1
kg
20
0.00000
2.00000
0.00000
2.00000
Your calibration
WTX120