Faults - HBM WTX120 Bedienungsanleitung

Faults

14 Faults
If you encounter any problems, please first check through the following list:
S Is the supply voltage in working order?
S Are any of the connected cables for the scales and peripheral devices
damaged?
S Are the connectors connected to the peripheral devices correctly?
S Are the connected sensors positioned correctly and fully operational?
If you encounter problems that you cannot remedy with the aid of this manual,
please collect as much information as possible detailing the problem.
If possible, try first to determine the conditions under which it occurs.
Determine whether the fault is reproducible - that is, whether it recurs under
identical conditions.
The following information is also essential for effective troubleshooting:
S Serial no. of the device
S Exact designation of the device, identifiable from the power-up notice
S Exact wording of all error messages appearing on the display
S Exact designation (type) of connected peripheral devices linked to the
problem (e.g. scale type, printer model, etc.).
Please contact your local Service quoting these details.
174
A04500_02_Y00_00 HBM: public
WTX120