HBM WTX120 Bedienungsanleitung Seite 77

Menu
PanelX access
Set PanelX Passwd
Update SSL cert
Start auto ping
Terminal no.:
WTX120
Key Function/secondary selection
Confirm and continue to next menu
On Set PanelX access authorization
On
Off
Note: Restart is required after changing the
parameter.
wtx Enter the PanelX admin password
The default password wtx can be changed any
time on the device.
Note: The admin password can be made up of
numbers and letters (upper/lower case).
On On
Off
Y Y
N
Note: In some networks it might be necessary
for the weighing terminal to send data packets
at regular intervals, because the intermediate
point (gateway, router or switch) cuts the
connection if there is no communication for a
longer period of time. If Auto PING is activated,
an ICMP packet is sent every 60 seconds.
Enter the terminal number for the network
001
name. The network name is formed from the
terminal type and terminal number:
e.g. WTX120_001, WTX120_123
A04500_02_Y00_00 HBM: public
Activate PanelX access authorization
Deactivate PanelX access authorization
Create a new SSL certificate
No action
Start to send ICMP packets to the gate­
way
Do not send
Service mode
75