Application
Hysteresis
In Below level mode, the hysteresis specifies the amount by which the level
must exceed the threshold for the limit switch status – and therefore also the
digital output – to be reset.
7.2.3
Mode: Outside band
Weight
Band span
Lower limit
Time
Output
Lower limit/band span
In Outside band mode, a band is defined by the lower limit and band span.
Outside that band, the relevant limit switch status is set. The limit is then also
set on a preconfigured digital output (e.g. output 3 GW1).
The limit switch status is reset as soon as the weight is back in the band.
82
WTX120
A04500_02_Y00_00 HBM: public