Starting Fine Flow Before Coarse Flow - HBM WTX120 Bedienungsanleitung

Supervisor mode

9.2.27 Starting fine flow before coarse flow

Sets or reads the duration for an initial fine flow phase before the coarse flow.
Information
This function is not active in a downwards weighing.
The fine flow signal is activated for the set time after the start or after taring
and before the coarse flow for the set duration. You can use this additional fine
flow time before the coarse flow to prevent excessive foaming of the liquid
being filled as a result of the coarse flow.
110 WTX120
A04500_02_Y00_00 HBM: public