HBM WTX120 Bedienungsanleitung Seite 40

Installation
Assign IP address of the EtherNet/IP module using 'BOOTP/DHCP
Server'
This example uses the 'BOOTP/DHCP Server' software from Rockwell Auto­
1
mation .
®
► Identify the EtherNet/IP module by comparing its MAC address.
► Select it and double click with the left mouse button.
► Assign an IP address (suitable for the PLC project).
► Wait for the DHCP request.
38 WTX120
A04500_02_Y00_00 HBM: public