Safety Instructions - HBM WTX120 Bedienungsanleitung

Safety instructions

1 Safety instructions
Intended use
The device is to be used exclusively for measurement tasks and directly
related control tasks within the application limits detailed in the specifications.
Use for any purpose other than the above is deemed to be non-designated
use.
Any person instructed to carry out installation, commissioning or operation of
the device must have read and understood the Operating Manual and in
particular the technical safety instructions.
In the interests of safety, the device should only be operated by qualified
personnel and as described in the Operating Manual. It is also essential to
comply with the legal and safety requirements for the relevant application
during use. The same applies to the use of accessories.
The device is not intended for use as a safety component. Please also refer to
the "Additional safety precautions" section. Proper and safe operation requires
proper transportation, correct storage, siting and mounting, and careful
operation.
Operating conditions
S Protect the device from direct contact with water.
S Protect the device from moisture and weather such as rain or snow. The IP
rating of the device is IP20 (DIN EN 60529).
S The device is designed for use in industrial environments and conforms with
Class A in accordance with DIN EN 55011.
S Do not expose the device to direct sunlight.
S Comply with the maximum permissible ambient temperatures and the data
on maximum humidity as stated in the specifications.
S The device may not be modified from a design or safety engineering point
of view without our express agreement. In particular, any repair or soldering
work on motherboards (replacement of components) is prohibited. When
exchanging complete modules, use only original parts from HBM.
8
A04500_02_Y00_00 HBM: public
WTX120