Number Of Dosing Operations; Total Weight; Mean Value Of Dosing Results; Weight Storage - HBM WTX120 Bedienungsanleitung

Supervisor mode

9.2.37 Number of dosing operations

With each dosing result, the number of dosing operations is increased by 1.
The Reset command clears the counter. The counter stops at 65,535 if it is not
reset. The total
dosing operations are updated simultaneously.

9.2.38 Total weight

The total weight is updated with every new dosing result:
The total weight, the mean value of the dosing results and the number of
dosing operations are updated simultaneously.

9.2.39 Mean value of dosing results

The mean value of the dosing results is updated with each new dosing result:
Mean value of dosing results = total weight/number of dosing operations
The total weight, the mean value of the dosing results and the number of
dosing operations are updated simultaneously.
9.3

Weight storage

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
The approved weights memory has capacity for approximately 120,000 entries.
After each completed weighing cycle, a data set is stored in the weight memory
together with the date and ident number.
116
weight, the mean value of the dosing results and the number of
Total weight new =
current dosing result + total weight old
W1 99999kgN
A04500_02_Y00_00 HBM: public
99999 T
WTX120