Mode: Inside Band; Digital I/O Configuration - HBM WTX120 Bedienungsanleitung

7.2.4

Mode: Inside band

Weight
Band span
Lower limit
Output
Lower limit/band span
In Inside band mode, a band is defined by the lower limit and band span.
Within that band, the relevant limit switch status is set. The limit is then also
set on a preconfigured digital output (e.g. output 3 GW1).
The limit switch status is reset as soon as the level is outside the band again.
7.3

Digital I/O configuration

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
For the settings in this menu group, the basic precondition is the hardware pre­
setting of the digital inputs/outputs (see chapter 6.4.2, page 64).
Information
During the configuration the digital I/Os are deactivated.
WTX120
A04500_02_Y00_00 HBM: public
Application
Time
83