HBM WTX120 Bedienungsanleitung Seite 76

Service mode
Menu
Excepted
Mask: 255.255.255.0
Gate: 144.84.77.65
DNS:
NTP:
FTP pwd:
74
Key Function/secondary selection
Enabled ports:
Enter a comma-separated list of ports that
should be able to be accessed from outside,
e.g. '443,1234'.
These ports are used by WTX120:
Function
PanelX
Modbus/TCP
External/remote display
Com0(ETH)
NTP
Firmware update
* Port can be configured at
Service mode->Interface->Com0(Eth)->Port
Confirm and continue to next menu
Enter the subnet mask
Note: 255.255.255.0 is preset from firmware
version 1.2.2.
Confirm and continue to next menu
Enter the IP address of the gateway, if required
Confirm and continue to next menu
Enter the DNS server
Confirm and continue to next menu
Enter the IP address of an NTP server for time
synchronization. A time zone must be selected
to synchronize correctly
Confirm and continue to next menu
Enter the password for FTP access to the
shared folder
A04500_02_Y00_00 HBM: public
Used ports
443, 8001, 1234*
502
3001
1234*
123, 11122
22, 1998, 1999
WTX120