Resetting The "Approved Weight Memory; Logbook; Software Id - HBM WTX120 Bedienungsanleitung

Supervisor mode
9.3.2

Resetting the "approved weight memory"

The "approved weight memory" can be reset in Service mode under the Reset
group (see chapter 6.6.2, page 72)
9.4

Logbook

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
The logbook lists all the firmware updates installed to date. It can only be
viewed, but not changed or deleted.
It displays the sequential number of the entry, the file name, date and time of
installation. The top entry is the most recent.
Menu
3 Logbook
Display an entry
Display an entry
Display an entry
9.5

Software ID

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
In this menu group you can view the identification number and version number
of the calibratable software.
Information
It can only be viewed, but not changed or deleted.
118
Key Function/secondary selection
Locate and display the logbook entries
Display the last entry
Continue to older entry
Back to more recent entry, or back to Logbook
menu level
A04500_02_Y00_00 HBM: public
WTX120