Connection Of The Profinet Device Variant - HBM WTX120 Bedienungsanleitung

Installation
Important
Cable: Always use twisted-pair cables! The surge impedance of the cable
should be approximately 150W.
4.9

Connection of the PROFINET device variant

Two RJ45 sockets are provided on the front for connection to a PROFINET
network. This enables a star or linear topology to be constructed.
The internal switch required for a linear topology is included in the WTX120.
Information
Cable length of a PROFINET segment without repeater (switch) max. 80m
Fig. 4.5 Connection of the PROFINET device variant
30
WTX
A04500_02_Y00_00 HBM: public
120
PROFINET
LEDs
WTX120