► Add a new module to "Rockwell Software Studio 5000"
► Select the weighing terminal, type of connection and assign a name.
► Load your program in the PLC.
- The data structures of the weighing terminal are dependent on the loaded
application program and are described in a special manual.
► Start the PLC.
4.12 Modbus/TCP
4.12.1 Server and port
WTX provides a Modbus/TCP server (=slave) in TCP port 502. The receiver
must implement a Modbus/TCP client (=master) accordingly.
2)
Rockwell Automation®, Studio™ 5000, RSLinx®, and DH+™ are all trademarks of Rockwell
Automation, Inc.
WTX120
A04500_02_Y00_00 HBM: public
Installation
2
)
.
41