Mode: Below Level - HBM WTX120 Bedienungsanleitung

Application
Level (GWn level)
In Above level mode, the level specifies what threshold value must not be ex­
ceeded. If the threshold is exceeded, the relevant limit switch status is set. The
limit is then also set on a preconfigured digital output (e.g. output 3 GW1).
As soon as the level falls back below the threshold, the limit switch status is
reset.
Hysteresis
In Above level mode, the hysteresis specifies the amount by which the level
must fall below the threshold for the limit switch status – and therefore also the
digital output – to be reset.
7.2.2

Mode: Below level

Weight
Hysteresis
Level
Time
Output
Level (GWn level)
In Below level mode, the level specifies what threshold value must not be ex­
ceeded. If the threshold is exceeded, the relevant limit switch status is set. The
limit is then also set on a preconfigured digital output (e.g. output 2 GW4).
As soon as the level rises back above the threshold, the limit switch status is
reset.
WTX120 81
A04500_02_Y00_00 HBM: public