Continuous Output/Hbm Protocol - HBM WTX120 Bedienungsanleitung

Continuous output/HBM protocol

11 Continuous output/HBM protocol
To access the Cont. Out group, select the following keys:
Menu
Standard
WTX120 V#.#
Password
1 Service mode
Service: Interface
Service:
The Ethernet (COM0) and COM1 interfaces can be configured as continuous
outputs. Various protocols can be set for them.
Assignment conflicts must be avoided when configuring the terminals.
The data set controlling a remote display consists of 15 ASCII characters plus
CR and LF. A fixed start character 'S,' a status character for rest (blank) or
motion (D), the net weight and the unit of measurement symbol are
transmitted. Unoccupied positions are filled by blanks.
146
Key
324
General
A04500_02_Y00_00 HBM: public
Function
Switch from Standard to version notice
Display the current firmware version number
Call up password entry within three seconds
Enter the password
Call up Service Mode
Switch to the options of the General group
Switch between the subgroups of the General
option in Service Mode
WTX120