Configuration; Configuration Of The Scale; Configuration Of Digital Inputs/Outputs - HBM WTX120 Bedienungsanleitung

Service mode
6.4

Configuration

For more information on the keys required to access this menu group, go to
the Navigation Pilot.
6.4.1

Configuration of the scale

Menu
Config.
6.4.2

Configuration of digital inputs/outputs

Menu
Config. Digital IO
→ Modbus TCP selected
IP
64
Key
Scale
Key
A04500_02_Y00_00 HBM: public
Function/secondary selection
ADM Select the scale driver
None Error message W1 not available
appears on the display
Function/secondary selection
Digital inputs/outputs
PIM
Modbus TCP To control external I/O modules
via Ethernet, WTX120 works as
the Modbus TCP master
Not used
None
Note: If the device variant has additional IOs,
PIM must always be selected!
Enter the IP address for the local network
WTX120