HBM WTX120 Bedienungsanleitung Seite 139

Menu
Select group 1-9
→ Linearization points present
Fixpoints active!
Menu
Unload Scale
Adjusting...
Zero: 0.00
Zero(mV/V):
WTX120
Key
Key
0.50000
A04500_02_Y00_00 HBM: public
Function/secondary selection
Press 4x for group 4 Zero Adjust
Linearization entries have already been made;
they may influence the calibration.
Function/secondary selection
Unload the scale.
Remove any auxiliary frame or other initial
load. When you press the Enter key the zero
point is measured.
Zero adjustment
Measurement of the zero point
Display the new zero point with 10 times
higher resolution (as a check).
Display the standardized signal, see
Calculate Span
Back to Select Group
Calibration
137