Device Configuration; Modbus/Tcp Functions - HBM WTX120 Bedienungsanleitung

Installation
PanelX
Modbus/TCP
Port 443
Port 502
TCP
IP
Ethernet
Fig. 4.8

4.12.2 Device configuration

The Modbus/TCP interface must be configured on the device.
The settings are under Service -> Config. Fieldbus ->
Fieldbus:Modbus TCP.
Information
Modbus/TCP cannot be used in parallel to ProfiNet or Ethernet/IP!

4.12.3 Modbus/TCP functions

WTX provides the following standard modbus/TCP functions* listed below.
All of the functions must always be actively requested by the Modbus/TCP
master. WTX will not send the data automatically.
42 WTX120
A04500_02_Y00_00 HBM: public