Service Mode - HBM WTX120 Bedienungsanleitung

Service mode

6 Service mode
To access the Service Mode group select the following keys:
Menu
Standard
WTX120 V#.#
Password
1 Service mode
Service Mode is used to configure the weighing terminal. In addition to the
configuration, Service Mode includes the functional tests for testing the hard­
ware and the option to backup data on a connected PC.
S The weighing terminal and connected peripheral devices may only be
configured and calibrated by qualified personnel!
S Before calling up Service Mode, all peripherals should have been
connected and configured!
S The Service password must be known to call up Service Mode.
S Inappropriate changes to settings in Service Mode could result in
operational malfunctions!
54
Key Function
Switch to version notice
Display the current firmware version number
Call up password entry within three seconds
Enter the password
324
Call up Service Mode
A04500_02_Y00_00 HBM: public
WTX120