HBM WTX120 Bedienungsanleitung Seite 63

Menu
Tare mode
Cont. Out:
Light Off (Min)
Power Off (Min)
Serial no.
WTX120
Key
Off
99
99
1610410
A04500_02_Y00_00 HBM: public
Function/secondary selection
Select Tare mode:
Gross/Net Press the Tare key to tare the
scale; press the Tare key again
to clear the tare.
Auto Clear The tare is automatically cleared
on returning to the zero range.
Net=0 Press the Tare key to tare the
scale continuously; on returning
to the zero range the tare is auto­
matically cleared and the display
switches to Gross.
For details on the continuous output,
see chapter 6, page 146
Setting for continuous output:
No continuous output
Off
HBM Remote HBM Protocol
Submenus see chapter 6.2.1,
page 62
Customized Freely defined output
Submenus see chapter 6.2.1,
page 62
Enter a time in minutes after which the display
backlight is turned off when not in use (power-
save function for battery operation). Press any
key to turn it back on.
If you enter 0 the power-save function is off.
Enter a time in minutes after which the device
is turned off when not in use (power-save
function for battery operation).
Service mode
61