Configuration Of Interfaces (Interface); Navigation; Setting The Ethernet Interface (Interface: Com0 (Eth)) - HBM WTX120 Bedienungsanleitung

6.1

Configuration of interfaces (Interface)

For more information on the keys required to access this menu group, go to
the

Navigation

Pilot.
Information
The set values must match the setting for the corresponding peripheral
devices.
6.1.1

Setting the Ethernet interface (interface: Com0 (Eth))

Menu
Interface Com0 (Eth)
Com0: Port:
Com0: Protocol
→Protocol TTY selected
Com0: Codepage
WTX120
Key
1234
AckNak
None
A04500_02_Y00_00 HBM: public
Function/secondary selection
Enter the port
Select the transfer protocol:
None Raw data only
Printer control (data only)
TTY
AckNak Secure procedure with
acknowledgment
Secure procedure without
NoAck
acknowledgment
Output character set:
None ISO8869 as per selected language
850 DOS code page 'Western Europe' for
older printers
DOS code page 'Central Europe'
852
866 DOS code page 'Russian'
Star DOS code page Star printer
Service mode
55