Symbols On The Device - HBM WTX120 Bedienungsanleitung

2.2

Symbols on the device

Observe supply voltage
CE mark
Statutory waste disposal marking
Ground symbol
Do not use DKU connection
WTX120
This symbol indicates that the supply voltage must be
between 12 and 30 V
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the
relevant EC directives (the Declaration of Conformity can
be found on the HBM website (www.hbm.com) under
HBMdoc).
In accordance with national and local environmental pro­
tection and material recovery and recycling regulations,
old devices that can no longer be used must be disposed
of separately and not with normal household waste.
Possible potential equalization connection
The symbol indicates that the DKU connection must not
be used if the WTX model has an internal display.
A04500_02_Y00_00 HBM: public
.
DC
Markings used
13