HBM WTX120 Bedienungsanleitung Seite 130

Calibration
→ Single-range balance Single range and One interval
Capacity
Interval
Information
To, for example, set the displayed capacity to 1234.00, the Capacity is set to
1234 and the Interval to 0.0100.
128
999999
999.9999
A04500_02_Y00_00 HBM: public
Enter the maximum load
Example: Capacity 1500
Note: No decimal places can be entered for the
Capacity. The decimal places are adjusted in
the next Interval parameter
Enter the scale interval of the single-range
balance. This equates to the decimal places.
Example: Interval 1.0000
Valid intervals are:
0.0001, 0.0002, 0.0005, 0.0010, 0.0020,
0.0050, 0.0100, 0.0200, 0.0500, 0.1000,
0.2000, 0.500, 1.0000, 2.0000, 5.0000,
10.0000, 20.0000, 50.0000, 100.0000,
200.0000, 500.0000
If you enter a value not listed here, the error
message Entry Not Valid! is displayed.
WTX120