Ultradent Gemini EVO 810 Bedienungsanleitung Seite 12

MOBILE APP & DASHBOARD
1. DOWNLOAD THE MOBILE APP
The Gemini EVO Laser App is available for iOS and Android devices. On your mobile app store, search for Gemini EVO laser. (Figure: 2.1)
2. REGISTERING AND AUTHENTICATING YOUR DEVICE
Once you have the App installed, select "I need an account" and follow the easy step-by-step instructions to register your laser. Registering your unit is an important step to allow your Gemini EVO laser to
receive internet connection. You will receive an authentication code via email. (Figure: 13.1)
3. SCAN YOUR LASER
Your Gemini EVO unit contains an unique QR code located on the bottom of your unit or activation pedal. Point your phone camera to the QR code and the app will scan the laser unit. You can nickname
your Gemini EVO laser any name you like and click SAVE. (Figure: 13.2)
4. ENABLING WI-FI
After saving your device name above, follow the simple steps on the App in order to enable the laser unit to start talking to your local Wi-Fi network. (Figure: 13.3–13.4)
1. Turn the Gemini EVO unit ON
2. Enter passcode
3. Select wavelength (any wavelength)
4. Press and hold the Wi-Fi icon for 3 seconds. "Wi-Fi Setup in Progress" voice confirmation is heard. Move to next step to select a local Wi-Fi.
5. SELECTING A WI-FI NETWORK
A list of Wi-Fi networks will be displayed. Please select the Wi-Fi network associated to your office location and enter appropriate password. Please note the Gemini EVO Laser Wi-Fi is compatible with 2.4
GHz networks only. If you have a secure firewall or Anti-Virus software, you may need to contact your network administrator in case there are difficulties connecting to your local Wi-Fi network. (Figure:
13.5)
6. ESTABLISHING A WI-FI CONNECTION
After selecting the appropriate Wi-Fi network and entering the password, the Gemini EVO unit will establish a secure connection with your local Wi-Fi. The Wi-Fi connection between your local Wi-Fi
network to the Gemini EVO unit can take up to 2 minutes to complete. The Gemini EVO unit displays a progress bar on the electroluminescent display. Upon connection the App displays the main page
shown below. (Figure: 13.6)
SEE FIGURE 13.7
01 - Gemini EVO laser name given during registration
02 - Wi-Fi connectivity status: Green = Connected to Wi-Fi, Red = Not connected to Wi-Fi
03 - Latest available software update
04 - Add / Remove Gemini EVO devices
05 - Videos, Instructions, Techniques
06 - Log in and out different users
Similar to identical user interface for Android users. Layout is subjected to change based on future updates on all platforms.
UPDATES
(Figure: 14.1)
With the iOS and Android App, you can perform automatic updates directly to your Gemini EVO laser. Automatic updates are extremely important as it enables your Gemini EVO laser to utilize the latest and
greatest improvements.
DEVICES
(Figure: 14.2)
This page will enable you to add or remove a Gemini EVO device from your registered account. You can have multiple Gemini EVO devices registered with one account. Units shown in green are currently
online. Units shown in red are currently offline.
VIDEOS
(Figure: 14.3)
The videos tab will show you several of the procedures that can be performed with the Gemini EVO laser. Additionally, we will upload the latest techniques and customer tips as reference.
STATUS
(Figure: 14.4)
The status tab will show several important status conditions such as the health of your battery, the strength of your Wi-Fi connection, and the ability to add and remove another Gemini EVO laser from your
account. The Staus page is the overall health of your Gemini EVO device.
WARRANTY
(Figure: 14.5)
With the iOS and Andriod apps, you can purchase extended warranty if qualified. The Gemini EVO laser comes with 2 years limited factory warranty. You can extend your factory warranty to an additional 24 or
36 months. Warranty starts from shipment day. Prices shown are subjective to change.
STATISTICS
(Figure: 14.6)
With the Gemini EVO app, you can track how many procedures have been performed by category, see which wavelength mode is used the most ,as well as the overall laser usage time of this Gemini EVO
device.
USER MANUAL
(Figure: 14.7)
With the iOS and Android apps, you can have access to the user's manual at any time. The user's manual will always contain the latest update, enabling you to always have access to the latest documentation.
ACCOUNT
(Figure: 14.8)
The account page allows you to change your registered name, phone number, and product nickname. This is an important feature in case the Gemini EVO device is exchanged with another office.
10
07 - Edit name registered
08 - Overall Laser unit information: Green = Receiving status, Red = Not receiving status
09 - Extended warranty availability and status
10 - Usage statistics
11 - Up to date User's Manual
12 - Account info / Change personal information