Stryker Performance-PRO XT Bedienungs- Und Wartungshandbuch Seite 50

English
ATTACHING AN OXYGEN BOTTLE TO AN OXYGEN BOTTLE HOLDER
To attach an oxygen bottle:
1 . Place an oxygen bottle in the holder .
2 . Insert the lower strap through the buckle and affix the strap onto itself to secure the oxygen bottle to the holder .
Note: Inspect the straps and clips for wear between use and replace the strap if it is no longer holding the oxygen
bottle .
CAUTION
• To avoid damage to the oxygen bottle holder (if equipped), the weight of the equipment must not exceed 40 lb
(18 kg) .
• Do not use two head end oxygen bottle holders at the same time .
Note: The optional fowler oxygen bottle holder (p/n 6500-141-000) is not compatible with the optional retractable head
section oxygen bottle holder (p/n 6085-046-000) .
Return To Table of Contents
1-46
Optional Accessories
6086-009-005 REV A www.stryker.com