Attaching The Upright Oxygen Bottle Holder - Stryker Gynnie OB/GYN Bedienungsanleitung

Attaching and positioning the removable IV pole (Continued)

Attaching the upright oxygen bottle holder

WARNING
• Do not place objects that exceed 40 lb (18 kg) in the upright oxygen bottle holder.
• Always use caution if the defibrillator tray/foot extender, footboard/chart holder, or upright oxygen bottle holder is
attached to avoid pinching your fingers when you position the foot end push handle option.
The upright oxygen bottle holder supports an oxygen bottle in a vertical position.
To attach the upright oxygen bottle holder:
1. Insert the support bar into any of the IV sockets.
2. Insert the cotter pin through the hole in the support bar to secure the bottle holder to the product.
Note: Do not use the upright oxygen bottle holder as a push/pull device.
www.stryker.com
Accessories
B
A
Figure 1-7: Removable IV pole
1061-009-005 REV A
English
EN
1-19