Herunterladen Inhalt Inhalt Diese Seite drucken

Manitou MRT-X 2150 Privilege Plus ST3A S2 Betriebsanleitung Seite 95

Inhaltsverzeichnis

Werbung

IT
INTERRUTTORI FUNZIONI OPTIONAL
INTERRUTTORE RADIO COMANDO
e
(
, paragrafo "Interruttori" ,
INTERRUTTORE FRENO MOTORE
Il freno motore decelera il sollevatore
telescopico senza usare frizione meccanica
per evitare il surriscaldamento del sistema
frenante.
Questo freno è principalmente utilizzato
nelle lunghe discese, e permette di frenare
la macchina senza sollecitare i freni.
Premere
l'interruttore
(2,
attivare o disattivare il freno motore.
Sul pannello di controllo una spia arancione
(2a,
3.22) indica che la funzione è attiva
(e paragrafo: "Strumenti e pannello di
controllo").
Sul interruttore (2,
3.22) il led si accende
(1,
3.22) per indicare che la funzione è
attiva.
Il freno motore consente due fasi di
decelerazione (0, 1a,1b,
3.22) una bassa
ed una intensa.
Condizioni di funzionamento del freno
motore.
Il freno motore funziona solo se:
- l'acqua motore è > 60 °C
- il Pedale dell'acceleratore non è premuto
p
- i giri del motore termico sono > di 1100
rpm.
IMPORTANTE!
Per
la massima potenza frenante
del freno motore, non superare
i 42 km/h di velocità. Se
necessario rallentare la velocità
della macchina premendo il
pedale dei freni di servizio.
Se la velocità della macchina
supera i 42 km/h, il guidatore
viene avvisato da un allarme
sonoro e da una segnalazione
ottica su tachimetro "BRAKE"
(frenare).
OPTIONAL FUNCTIONS SWITCHES
RADIO CONTROL SWITCH
e
(
, paragraph "Switches" ,
3.1)
ENGINE BRAKE SWITCH
The engine brake decelerates the telehan-
dler without using mechanical friction in
order to avoid the overheating of the brake
system.
This brake is mainly used in the long de-
scents, and it allows to brake the vehicle
without stressing the brakes.
Press the switch (2,
3.22)
per
disable the engine brake.
On the control panel an (2a,
indicator light indicates that the function
is active (e paragraph: "Instrument control
panel").
On the switch (2,
(1,
3.22) comes on to indicate that the
function is active.
The engine brake allows two stages of de-
celeration (0, 1a, 1b,
intense one.
Operating conditions of the engine brake.
The engine brake only works if:
- the engine water temperature is > 60°C
- the accelerator pedal is not pressed
- the revs of the I.C. engine are > 1100
p
rpm
IMPORTANT!
maintain the braking power of
mantenere
the engine brake, the speed shall
not exceed 42 km/h. If required,
slow down the machine by
pressing the service brake pedal.
If the speed of the machine
exceeds 42 km/h, the driver will
be warned by an alarm sound
and an optical signal "BRAKE"
on the tachometer.
2a
EN
EN
SCHALTER OPTIONAL-FUNKTIONEN
SCHALTER FUNKSTEUERUNG
e
(
3.1)
SCHALTER MOTORBREMSE
Die Motorbremse verlangsamt den Tele-
skopstapler, ohne die mechanische Kup-
plung zu benutzen, um eine Überhitzung
des Bremssystems zu vermeiden.
Diese Bremse wird vor Allem bei langen Bergab-
Fahrten benutzt und erlaubt es, die Maschine zu
bremsen, ohne die Bremsen zu beanspruchen.
Den Schalter (2,
3.22) to enable or
torbremse zu aktivieren oder zu deaktivieren.
An der Kontrolltafel leuchtet eine oran-
3.22) orange
gefarbene
auf,wenn die Funktion aktiv ist (e Abschnitt:
"Instrumente und Kontrolltafel").
Am Schalter (2,
3.22) the LED
(1,
Funktion aktiv ist.
Die Motorbremse erlaubt zwei Verlangsa-
mungsphasen (0, 1a, 1b,
3.22), a low and an
drige und eine intensive.
Betriebsbedingungen der Motorbremse.
Die Motorbremse funktioniert nur, wenn:
- die Kühlmitteltemperatur > 60 °C be-
- das Gaspedal nicht gedrückt ist
p
- die Motordrehzahl > 1100 rpm ist.
In
order
to
3.22
1
2
2-43
DE
ES
, Abschnitt "Schalter" ,
3.1)
3.22) drücken, um die Mo-
Kontrollleuchte
3.22) wird die LED
3.22)
eingeschaltet,
wenn
3.22): eine nie-
trägt
WICHTIG! Um die maximale
Bremsleistung der Motorbremse
beizubehalten,
dürfen
42
km/h
Geschwindigkeit
überschritten werden. Ggf. die
Geschwindigkeit der Maschine
durch Drücken des Pedals der
Betriebsbremsen
Wenn die Geschwindigkeit der
Maschine 42 km/h überschreitet,
wird der Fahrer durch einen
Alarmton und die Anzeige am
Tachometer "BRAKE" (Bremsen)
gewarnt.
0
1a
1b
(2a,
3.22)
die
nicht
drosseln.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mrt 2150 privilege plus st4 s2Mrt-x 2550 privilege plus st3a s2Mrt 2550 privilege plus st4 s2

Inhaltsverzeichnis