Keypad Operation; Control Buttons - Control Techniques Unidrive sp Kurzhandbuch

Safety Product Mechanical
Information Information Installation
5.2

Keypad operation

5.2.1

Control buttons

The keypad consists of:
1. Joypad - used to navigate the parameter structure and change parameter values.
2. Mode button - used to change between the display modes – parameter view,
parameter edit, status.
3. Three control buttons - used to control the drive if keypad mode is selected.
4. Help button (SM-Keypad Plus only) - displays text briefly describing the selected
parameter.
The Help button toggles between other display modes and parameter help mode. The
up and down functions on the joypad scroll the help text to allow the whole string to be
viewed. The right and left functions on the joypad have no function when help text is
being viewed.
The display examples in this section show the SM-Keypad 7 segment LED display. The
examples are the same for the SM-Keypad Plus except that the information displayed
on the lower row on the SM-Keypad is displayed on the right hand side of the top row on
the SM-Keypad Plus.
Figure 5-4 Display modes
Status
Mode
(Display
not
flashing)
To enter Parameter
Mode, press
Parameter
Mode
(Upper
display
flashing)
Use
to select parameter for editing
To enter Edit Mode,
press
RO
parameter
* can only be used to move between menus if L2 access has been enabled (Pr
0.49). Refer to section 5.11 Parameter access level and security on page 25.
**Timeout defined by Pr 11.41 (default value = 240s).
Unidrive SP Short Form Guide
Issue Number: 2
Electrical Getting
Menu 0
Installation Started
Timeout**
key or
When returning
to Parameter
Mode use the
keys to select
* keys
another parameter
to change, if
required
key
R/W
parameter
Edit Mode
(Character to be edited in lower line of display flashing)
Change parameter values using
www.controltechniques.com
Running Advanced
the motor parameters
To return to
Status Mode,
press key
*
To exit Edit Mode,
press key
UL Listing
Diagnostics Appendix
Information
Timeout** Timeout**
Temporary
Parameter
Mode
(Upper display
flashing)
keys.
19