Displaying Parameters With Non-Default Values Only; Displaying Destination Parameters Only; Parameter Access Level And Security - Control Techniques Unidrive sp Kurzhandbuch

Safety Product Mechanical
Information Information Installation
5.9

Displaying parameters with non-default values only

By entering 12000 in Pr xx.00, the only parameters that will be visible to the user will be
those containing a non-default value. This function does not require a drive reset to
become active. In order to deactivate this function, return to Pr xx.00 and enter a value
of 0.
Please note that this function can be affected by the access level enabled, refer to
section 5.11 Parameter access level and security for further information regarding
access level.
5.10

Displaying destination parameters only

By entering 12001 in Pr xx.00, the only parameters that will be visible to the user will be
destination parameters. This function does not require a drive reset to become active. In
order to deactivate this function, return to Pr xx.00 and enter a value of 0.
Please note that this function can be affected by the access level enabled, refer to
section 5.11 Parameter access level and security for further information regarding
access level.
5.11

Parameter access level and security

The parameter access level determines whether the user has access to menu 0 only or
to all the advanced menus (menus 1 to 22) in addition to menu 0.
The User Security determines whether the access to the user is read only or read write.
Both the User Security and Parameter Access Level can operate independently of each
other as shown in the table below:
Pr Access Level
L1
L1
L2
L2
RW = Read / write access
The default settings of the drive are Parameter Access Level L1 and user Security
Open, i.e. read / write access to Menu 0 with the advanced menus not visible.
Unidrive SP Short Form Guide
Issue Number: 2
Electrical Getting
Menu 0
Installation Started
User Security
Open
Closed
Open
Closed
RO = Read only access
www.controltechniques.com
Running Advanced
Diagnostics Appendix
the motor parameters
Menu 0 status Advanced menus status
RW
RO
RW
RO
UL Listing
Information
Not visible
Not visible
RW
RO
25