Deflating The; Working Procedure; Configuration Of Wheel; Bead Breaking - SATA AE1031H Bedienungsanleitung

5.3.a DEFLATING THE
Deflate the tyre completely using the valve (Fig. 19d).

5.4. WORKING PROCEDURE

5.4.a. CONFIGURATION OF WHEEL
.From the main screen (Fig. 20), press the wheel icon
the wheel diameter quickly to select the wheel diameter quickly
Alternatively, from the main screen:
.Press to increase or decrease the diameter in inches to
set the required value.
-.Press the small arrows
diameter in tenths of an inch to make any fine adjustments necessary.
5.4.b. BEAD BREAKING
CAUTION!
KEEP YOUR HANDS
AND OTHER BODY
PARTS AWAY FROM
MOVINGPARTS
Completely release the air from inside the tyre before continuing. Never carry out bead breaking before having
completely release the air from the tyre. Failure to release the air could cause injury to the operator or damage to the
equipment, the tyre or the wheel.
AE1031H
to increase or decrease the wheel
中文
EN
to select
CAUTION!
KEEP FEET
CLEAR OF THE
BEAD BREAKER
AND LIFTER
CAUTION!
DE RU KO PT JA ES
CAUTION!
DO NOT PER-FORM
BREAKING THERE IS
IF
125