Inflating Tyres - SATA AE1031H Bedienungsanleitung

3. Never exceed the inflation pressure for the tyre (as read on the pressure gauge) indi.cated by the manufacturer on the
side of the tyre itself.
4. Never place your head or any part of your body over a tyre during the inflation process or when attempting to seat
beads.
This machine is not intended to be a restraining device for exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating, never lean over.
During this operation, noise levels assessed at 85 dB(A) may occur. Therefore operators are advised to
wear hearing protection devices.
The breakage of a pressurised rim or tyre could cause an explosion that projects the wheel to the side or upwards with a
force that could cause damage, serious injuries or even death!
Do not mount tyres on rims without first checking the exact correspondence of the dimensions (printed on the rim and
tyre) and for the presence of defects or damage. This tyre changer is NOT a safety device and does not eliminate risks
and damage from a possible explosion. Keep all other persons away from the work area.
5.6.b.INFLATING TYRES
1.Ensure the wheel is clamped securely on the turntable by the centring handle
(Fig. 26a).
2.Ensure that the tool holder head, the lower bead breaker and the bead
depressor are out of the work area and, if possible, in the rest position.
3.Remove the valve stem core if not already done (Fig. 26b).
134
AE1031H
中文
EN
CAUTION!
CAUTION!
DE RU KO PT JA ES