SATA AE1031H Bedienungsanleitung Seite 129

中文
EN DE RU KO PT JA ES
AE1031H
9.Keepingthe selector turned,press the
pedal to turn the turntable and demount the upper part of the
tyre from the rim (Fig. 22g).
If necessary, operate the control to slightly raise the head
and complete top bead removal.
10.Release the selector and the pedal.
11.Move the lever downwards to bring the lower bead
breaker disc to the rest position. 。
12.Manually release the hook from the bead.
13.Move the tool holder head away from the work area by operating
controls and
14.Operate the lever tomove the bottom bead breaker
disc upwards (Fig. 22h) to about 10 mm above the upper rim edge.
N.B.:Makethisoperationeasierbymanuallylifting the tyre to 6 o'clock.
15.Press the button to activate penetration of the
bottom bead breaker disc.
16.Press the pedal to turn the turntable until the lower bead
exits completely.
17.Move the lever downwards to bring the lower bead
breaker disc to the rest position.
129