Temperature - SATA AE1031H Bedienungsanleitung

6.4 TEMPERATURE

From the main screen (Fig. 49), press the
The temperature measuring sensor is an electronic device to read
the tyre temperature. Correct use allows the operator to check
and display the tyre bead and sidewall temperature, for mounting/
demounting as indicated by WDK regulations for RUN FLAT and
UHP tyres
Intended operating conditions
The temperature sensor is intended solely for measuring tyre
temperature, as described in this manual. Any other use is
inappropriate
Technical data
Reading precision.................................................0.1 ℃
Operation
Press the button to activate the temperature sensor.
.Move the sensor to bring it into contact with the tread (Fig, 49a, if tyre
is demounted) or with the sidewall (Fig 49b if tyre is mounted on wheel)
To ensure an accurate reading, place the end of the sensor against the tyre, with no other object or material in
between.
-The temperature reading is shown immediately on the display in °C and °F (see
Fig. 49c).
-The background changes colour to immediately indicate the status of
conformity to the WDK proce¬dure in relation to the temperature value
measured: Green tyre temperature correct. WDK procedure operations may be
performed. Temperature be-
158
AE1031H
button.
CAUTION!
中文
EN DE RU KO PT JA ES