SATA AE1031H Bedienungsanleitung Seite 154

中文
EN DE RU KO PT JA ES
AE1031H
-connect the disconnected hose. 。
Air circuit leak
-Repair the leak
Broken solenoid valve.
-Contact support service
A11
Inflation or deflation time which is too long
A12
The pressure has not decreased after several attempts
Air circuit obstruction
-Remove obstruction.
Broken solenoid valve.
Contact support service
A13
Pressure which is too high
A14
eeprom read error
A15
eeprom write error
In addition to error messages, other messages may also appear on the display to indicate machine status. These are:
AU
Self-calibration programme;
uuu
This message appears on the large screen during self-calibration and indicates that the pres.sure value is being read: do
not move the air hose or change the pressure.
6.2.
From the main screen (Fig. 47), press the button.
The camera is an electronic precision instrument tc display all operations
carried out on the tyre under.side, on a specific screen, guaranteeing
maximum control for the operator. The camera also has an automatic
luminosity regulation system for correc
154