SATA AE1031H Bedienungsanleitung Seite 152

5.Press the arrows to select the required inflation pressure.
The selected pressure value is displayed in red
6.Connect the inflation hose to the valve stem (Fig. 46b).
INFLATION
7.Press the button to start the cycle.
The wheel is inflated automatically to the selected pressure.
The pressure is not displayed until the entire inflation cycle is
complete, and three horizontal red bars are shown instead of the
value (Fig. 46c). Once inflation is complete, the pressure is dis.played
again in green (Fig. 46d).
8.Disconnect the Doyfe inflation fitting from the wheel.
9.Fit the inner core of the valve (Fig. 46a).
SPECIAL INFLATION
RISK OF EXPLOSION
Never exceed the pressure recommended by the tyre manufacturer. Never mount tyres on
rims with a different diameter
An exploding tyre can cause personal injury or death
Use this function to improve tyre bead seating.
7A. Press the overinflate button
152
AE1031H
中文
EN
DANGER
DE RU KO PT JA ES