5.1. TURNING THE MACHINE ON
After turning on the machine, the RESET button will appear on the
display (Fig. 15).
Press to start the machine.
5.2.PRELIMINARY CHECKS
Check that there is a pressure of at least 8 bar on the Filter Regulator pressure gauge.
If the pressure is lower than the minimum level, some movements such as the rotation of the tool holder head may
not function correctly
Check that the machine has been adequately connected to the power mains.
5.3.LOADING AND CLAMPING THE WHEEL
122
AE1031H
中文
EN
DE
.Load the wheel onto the lifter.
.Press the
pedal (Fig. 16a) until it reaches
the height of the turntable spindle (Fig. 16b).
RU
KO
PT
JA
ES