Tyre; Safety - SATA AE1031H Bedienungsanleitung

5.6. TYRE

5.6.a. SAFETY
Check that both the upper and lower beads and the rim bead seat have been
suitably lubricated with approved paste for mounting.
Safety goggles with plain lenses and safety footwear must be worn.
Clamp the rim on the turntable during inflation.
Remove the valve stem core if not already done (Fig. 25a).
Connect the inflation hose to the valve stem (Fig. 25b).
Avoid personal injury. Carefully read, understand and follow all instructions.
1.Overinflated tyres can explode, producing hazardous flying debris that may result in anaccident.
2. Tyres and rims that do not have the same diameter do not correspond. Do not attempt to mountor inflate tyres with
rims that do not correspond. For example, never mount a
16" tyre on a 16.5" rim, (or vice versa). It is very dangerous. Tyres and rims that do not correspond could explode, causing
accidents.
AE1031H
RISK OF EXPLOSION
Never exceed the pressure recommended by the tyre manufacturer. Never mount tyres on
rims with a different diameter
An exploding tyre can cause personal injury or death.
中文
EN
DANGER
Press the pedal to inflate the
tyre and make the beads adhere. Stop frequently to check the
air pressure in the tyre on the pres.sure gauge (1, Fig. 26d).
CAUTION!
DE RU KO PT JA ES
133