Demounting - SATA AE1031H Bedienungsanleitung

11.Lubricate the bead to make bead breaking easier (Fig. 21f).
12.Press the pedal to turn the turntable.
13.Operate the control, tapping on it, to lower the bead breaker
disc and fully remove the bead fromits seat on the rim.
14.Turn at least one rotation to finish upper bead breaking.
15.Move the lever upward to automatically stop penetration and to
withdraw the disc from the work area.
5.4.c. DEMOUNTING
1.Press the button tomove thedemounting tool to the work position
(Fig. 22a).
2. . Move the lever downwards to place the demounting tool in contact
with the tyre (Fig. 22b).
3.Rotate the wheel, exercising pressure on the
moving the lever downwards until completely inserting the mobile
tool under the bead (Fig. 22c).
4.Keeping the wheel in rotation, press and hold down the
button to hook the bead.
AE1031H
中文
EN DE
pedal while
RU KO PT JA ES
127