Werbung
Verfügbare Sprachen
Verfügbare Sprachen
中文
EN
DE
RU
KO
PT
JA
ES
AE1031H
CAUTION!
The top bead breaker automatically hooks during the descent phase.
1.Operate the
lever and move the disc, taking it to about 5 mm above
the rim edge (Fig. 21a).
2.Press the
button to activate pen.etration of the lower bead
breaker disc (Fig. 21b).
4.Press the
pedal to turn the turntable.
5.Operate the control,
tapping on it, to raise the bead breaker disc and
fully remove the bead from its seat on the rim.
6.Turn at least one rotation to finish lower bead breaking.
7.Move the
lever downward to automati.callystoppenetration
andtowithdrawthedisc from the work area.
8.Use the
control tomove the upper bead breaker disc to the work
position.
9.Operate the
lever andmove the disc, tak.ing it to about 5 mmbelow the
rimedge (Fig. 21d).
10.Press the upper bead breaker disc penetration button
(Fig. 21e).
126
Werbung
Kapitel
Fehlerbehebung
