SATA AE1031H Bedienungsanleitung Seite 131

8.Press the pedal to start the rotation until the second
bead is mounted (Fig. 23e.Fig. 23f).
Avoid personal injury. Make sure the top bead is correctly inserted in the rim well, throughout the mounting stage.
9.Remove the bead pressing tool as well as the bead pressing tool clamps if used.
10.Move the lever downwards to bring the lower bead breaker disc to the rest position.
1 1 . M ov e t h e t o o l h o l d e r h e a d aw ay f r o m t h e w o r k a r e a by o p e r a t i n g c o n t r o l s
Position the bead pressing tool in the correct rest position so that it does not interfere with
the work area.
AE1031H
中文
EN
CAUTION!
CAUTION!
DE RU KO PT JA ES
a n d
131