SATA AE1031H Bedienungsanleitung Seite 160

中文
EN DE RU KO PT JA ES
AE1031H
Operation
-Press the button to activate the TMPS.
-The vehicle brand database will be displayed (Fig. 50a).
-Use the arrows (1 and 2) on the right, or vertically drag the cursors
between the two arrows to search for the brand.
Click the correct brand to highlight (Fig. 50b).
.Press 3 to confirm. If the brand selected is incorrect, press
4 to return to the previous page.
-Perform the same procedure to select the model (Fig. 50b) and year
of manufacture (Fig. 50c). If the year selected is incorrect, press 4
to return the previous page. 。
to
-Press to confirm (Fig. 50c).
-The data entry page shown in Fig. 50f is shown:
1.The key enabling the sensor
2.The key displaying sensor technical data
3.The vehicle data base key (to make a new choice)
4.The key to exit TPMS
5.Data of the selected vehicle (brand, model, year of manufacture)
6.The sensor battery level
7.The sensor code
8.The sensor pressure in bar and PSI
9.The temperature inside the tyre in °C and °F
-Place the sensor on the tyre side and facing towards the valve at
an angle of approximately 45° (Fig. 50d). Never
160