Operator Position - SATA AE1031H Bedienungsanleitung

中文
EN DE RU KO PT JA ES
AE1031H
.Revolver head with automatic or console-activated bidirectional vertical stroke, for bead breaking and obtaining
optimal mounting.
and demounting of the tyre without the need to use the bead lifter lever.
.Pneumatic wheel lift, to load and unload the wheel from the work area. Controls are grouped on:
.an adjustable ergonomic console,
.a touch screen, for configuring and viewing machine functions, and a pedal unit.
This configuration allows the operator to work safely, without having to move from his work station.
Each machine has a data plate Fig. 7, with information about the machine and some technical data.
As well as the manufacturer's details, the plate indicates:
Mod..Machine model;
V.power supply voltage in Volts; A.Input voltage in Amperes;
kW.Absorbed power in kW; Hz.Frequency in Hz;
Ph.Number of phases;
bar.Operating pressure in bar; ity System;
EC.EC marking.

4.1. OPERATOR POSITION

Fig. 8 illustrates the operator positions during the various operating
phases: A wheel loading only
B other operations
The display for configuring and display.ing wheel data, the operating
console and pedal unit are on the same side of the machine. This
side is the work station of the operator using the ma.chine. The
operator may operate on the wheel and machine controls from this
position only. In these conditions, the operator can carry out, monitor
and check the outcome of all tyre change operations and take action
in the case of any unforeseen events.
116