Electrical And Pneumatic Con.nections - SATA AE1031H Bedienungsanleitung

1.2.c. ELECTRICAL AND PNEUMATIC CON.NECTIONS
The electrical power line connecting the machine must be suitably sized in relation to:
• the electric power absorbed by the machine,
• indicated on its data plate (Fig. 1);
• the distance between the machine and the electric hook-up point, so that voltage drops under full load do not exceed 4% (10% when starting
up) of the rated voltage specified on the data plate.
.The user must:
• fit a power plug on the power supply lead in compliance with the relevant safety standards;
• connect the machine to its own electrical connection.A, Fig. 2.and fit a differential safety circuit-breaker with 30 mA residual current; •install
protection fuses on the power line that are suitably sized in accordance with the indications provided on the machine data plate (Fig. 1);
• connect the machine to an industrial socket; the machine must not be connected to do.mestic
An effective grounding connection is essential for correct operation of the machine.
Make sure the available pressure and the rendered capacity of the compressed air system are compatible with those
required for correct machine operation.see the "Technical Data" sec.tion. For correct machine operation, the compressed
air supply line must provide a pressure range from no less than 8.5 bar to no more than 16 bar and guarantee an air flow
rate greater than the average consumption of the machine, which is equal to 160 Nl/min.
108
AE1031H
CAUTION!
中文
EN DE RU KO PT JA ES