SATA AE1031H Bedienungsanleitung Seite 155

中文
EN DE RU KO PT JA ES
AE1031H
Intended operating conditions
The camera has been designed exclusively to display operations carried out on the tyre underside, as described in this
manual. Any other use is inappropriate.
Technical data
-power supply............................................24Vdc
OPERATIO
-Press the key to use the camera.
-An image of the tyre underside will appear on the display (Fig.
47a).
Luminosity will be automatically configured.
If the image is not optimal, press the and keys,
pressing gently on the right side of the display, to manually adjust
luminosity. The configuration will be automatically stored and kept
each time the camera is used again.
-Press the key in the top left-hand corner to go back to
automatic mode.
-Press the middle of the display to exit the applica.tion and return
to the main screen (see Fig. 47b).
Note: If the camera is not used for more than 5 minutes, the main
screen will appear automatically
TROUBLESHOOTIN
The camera does not show any images
Cable disconnected from camera
-Connect the cable (Fig. 47c)
Camera failure
-If the problem persists, contact the technical
The image is out of focus
The optics are not set properly
-Contact the technical assistance
155