Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If error messages are displayed, check the mes.sages in the ERROR
MESSAGES chapter in this manual.
2. Select UPDATE P3K then press the confirm but¬ton
(Fig. 44a).
The message shown in Fig. 44b is displayed.
-If the update does not start after 10 attempts, an error message
is displayed (Fig. 44c).
Press the confirm key
screen, then repeat the steps from point 1.
-Ifthe update starts, a progress message on new file loading will
be displayed (Fig. 44d).
-If file loading is interrupted, the message in Fig. 44e will be
displayed.
3. After loading, the message in Fig. 44f will be displayed.
148
AE1031H
UPDATE P3K
1. Insert the USB key with the updated software into the USB port (Fig. 44) of the S
1000 and wait 10 seconds.
to go back to the previous
中文
EN
DE
RU
KO
PT
JA
ES
Werbung
Kapitel
Fehlerbehebung
